Whimsical Woodland Fox Pumpkin Free Pattern – A Knitted Autumn Amigurumi

Bring the magic of a forest autumn to your home with this charming knitted fox pumpkin, a cozy amigurumi that blends rustic charm with playful whimsy. Perfect for seasonal decor or a heartfelt handmade gift, this pattern is a delightful project for crafters seeking something unique. The finished piece features a plump, rounded pumpkin body with vertical ridges, a sweet fox face with cream muzzle and black nose, and adorable triangular ears—all worked in soft, worsted weight yarn. Whether you're an experienced knitter or a confident beginner, this step-by-step guide will walk you through every detail to create your very own woodland companion.

Materials Needed

Before you begin, gather the following supplies. All yarn is worsted weight (medium/4), and the gauge is not critical for this stuffed toy, but matching it will help achieve the intended size.

• Yarn: Worsted weight yarn in burnt orange (main color, approx. 150–200 yards), cream (muzzle, approx. 20 yards), charcoal black (nose and eyes, approx. 10 yards), and brown or green (stem, approx. 10 yards). Suggested: Lion Brand Vanna's Choice in Terracotta, Cream, Charcoal, and Toffee.
• Needles: US 5 (3.75 mm) knitting needles, or size needed to obtain gauge. Straight needles are fine for flat pieces.
• Gauge: 20 stitches and 28 rows = 4 inches in stockinette stitch. (Not critical, but check for consistent tension.)
• Notions: Tapestry needle for seaming and embroidery, stitch markers, scissors, and polyester fiberfill stuffing.

Step-by-Step Instructions

This knitted amigurumi is worked flat in pieces and seamed, then stuffed. Use a long tail (at least 8 inches) when casting on or binding off for seaming. All pieces are knitted in stockinette stitch (knit on RS, purl on WS) unless otherwise noted. Work all increases (M1) by picking up the bar between stitches and knitting into the back loop to avoid holes.

Head (worked flat, then shaped)

Using burnt orange, cast on 12 stitches.

• Row 1 (RS): Knit.
• Row 2: Purl.
• Row 3: K1, M1, knit to last stitch, M1, K1. (14 sts)
• Row 4: Purl.
• Repeat Rows 3–4 until you have 22 stitches. (You will have increased 5 times total, ending with a purl row.)
• Work even (knit RS, purl WS) for 10 rows.
• Next row (RS): K1, k2tog, knit to last 3 sts, k2tog, K1. (20 sts)
• Next row: Purl.
• Repeat the decrease row (as above) every other row until 10 stitches remain. (You will decrease 5 times total, ending with a purl row.)
• Bind off all stitches. This forms the fox face shape—a rounded oval that narrows at the bottom.

Fox Ears (make 2)

Using burnt orange, cast on 6 stitches.

• Row 1: Knit.
• Row 2: Purl.
• Row 3: K1, k2tog, K1, k2tog, K1. (4 sts) Note: You are decreasing 2 stitches evenly.
• Row 4: Purl.
• Row 5: K2tog, k2tog. (2 sts)
• Bind off. Fold each ear in half (right sides together) and sew the side edges together to form a triangle. Turn right side out. Set aside.

Fox Muzzle (worked in cream)

Cast on 8 stitches in cream.

• Row 1: Knit.
• Row 2: Purl.
• Row 3: K1, M1, knit to last stitch, M1, K1. (10 sts)
• Row 4: Purl.
• Repeat Rows 3–4 until you have 14 stitches. (Increase 3 times total.)
• Work even for 4 rows.
• Bind off. This creates a rounded oval muzzle.

Fox Nose (worked in charcoal black)

Cast on 4 stitches.

• Row 1: Knit.
• Row 2: Purl.
• Row 3: K2tog, k2tog. (2 sts)
• Bind off. This makes a small square nose. (It will be sewn onto the muzzle.)

Body (pumpkin shape, worked flat)

Using burnt orange, cast on 20 stitches.

• Row 1: Knit.
• Row 2: Purl.
• Row 3: K1, M1, knit to last stitch, M1, K1. (22 sts)
• Row 4: Purl.
• Repeat Rows 3–4 until you have 30 stitches. (Increase 5 times total.)
• Work even for 20 rows.
• Next row (RS): K1, k2tog, knit to last 3 sts, k2tog, K1. (28 sts)
• Next row: Purl.
• Repeat the decrease row every other row until 10 stitches remain. (Decrease 5 times total.)
• Bind off. This creates a rounded, pumpkin-like body that is wider in the middle and narrows at both ends.

Pumpkin Ridges (worked in burnt orange, make 3)

Cast on 6 stitches.

• Work in stockinette stitch for 30 rows.
• Bind off. These strips will be sewn vertically around the body to create the pumpkin ridges. (They should be long enough to span the body from top to bottom.)

Stem (worked in brown or green)

Cast on 8 stitches.

• Work in stockinette stitch for 6 rows.
• Bind off. Roll into a cylinder (right side out) and sew the long edges together. Set aside.

Assembly

Follow these steps carefully to assemble your fox pumpkin. Use a tapestry needle and the long tails left from casting on/binding off. Stuff each piece as you go for a firm, plush result.

1. Head: Stuff the head lightly with fiberfill, shaping it into a rounded oval. The narrow end is the bottom (chin).
2. Body: Stuff the body firmly with fiberfill, shaping it into a plump pumpkin. The narrow ends are top and bottom.
3. Sew head to body: Align the narrow end of the head with the top of the body (the end with the bind-off edge). Sew securely using a whip stitch, going through both layers. Ensure the seam is neat and hidden.
4. Attach muzzle: Position the cream muzzle on the center of the head, placing it slightly below the top edge (about 1/3 down from the top). Stuff the muzzle lightly before sewing completely. Sew around the edges using a whip stitch, leaving a small opening to insert stuffing, then close.
5. Attach nose: Sew the black nose onto the center of the muzzle, using a whip stitch around the edges. It should sit slightly above the bottom edge of the muzzle.
6. Attach ears: Sew the ears to the top corners of the head, angling them outward. Position them about 1 inch apart at the top center. Sew securely using a whip stitch, going through the base of each ear and the head.
7. Embroider eyes: Using charcoal black yarn and a tapestry needle, embroider two small eyes on the head above the muzzle. Use a satin stitch: bring the needle up from the back, make small straight stitches horizontally to fill a small oval shape (about 1/4 inch wide). Place them symmetrically, about 1/2 inch apart, and about 1/2 inch above the muzzle.
8. Attach pumpkin ridges: Sew the three ridge strips vertically around the body. Place one at the center front, and one on each side, spacing them evenly (about 1/3 of the circumference apart). Use a whip stitch along the long edges of each strip, sewing them to the body. Ensure the body is firmly stuffed before closing the last seam.
9. Attach stem: Sew the rolled stem to the top center of the body, using a whip stitch around the base. It should sit between the ears, slightly behind them.
10. Weave in all ends: Use the tapestry needle to hide any remaining yarn tails inside the pieces. Trim excess.

Your whimsical woodland fox pumpkin is complete! Display it on a shelf, mantel, or as a centerpiece with fallen leaves for a cozy autumn touch. This pattern is also a wonderful handmade gift for fox lovers or as a unique seasonal decoration. Enjoy your new knitted friend!